OEM 5.5kw Single Phase Commercial Solar Inverter
Home » Products » Off Grid Solar Inverter » HMK PLUS » OEM 5.5kw Single Phase Commercial Solar Inverter
This product is no longer available

loading

OEM 5.5kw Single Phase Commercial Solar Inverter

  • HMK PLUS

  • Hinvert

  • 5500W

  • 230 VAC

  • 170-280 VAC (For Personal Computers) /90-280 VAC (For Home Appliances)

  • 50 Hz/60 Hz (Auto sensing)

  • 11000va

  • 10 ms (For Personal Computers) ; 20 ms (For Home Appliances)

  • Dual output(Smart load)

  • Pure sine wave

  • 48 VDC

  • YES

  • 6000W

  • 120A

  • 98%

Availability:

This multi-function pure sine wave Hybrid inverter/charger combines functions of inverter, MPPT solar charger, and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display shows user-configurable and easy-accessible button operations such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

Support 48V lead acid, lithium battery, and CAN WORK WITHOUT BATTERY!

(Important NOTE: when the inverter work without a battery, LCD will show error bP, this is ok, and the inverter will operate normally. Don't worry! )

Features


  • Configurable input voltage ranges for home appliances and personal computers via the LCD control panel

  • Configurable AC/Solar Charger priority/battery charging current based on applications via the LCD control panel

  • Compatible with utility mains or generator power

  • Auto restart while AC is recovering

  • Overload / Over temperature / short circuit protection

  • Intelligent battery charger design for optimized battery performance

  • Cold start function


CAUTION!!


  • Shock Hazard: Installation must be performed with care due to high battery voltage in series.

  • Do not place anything between the inverter terminals and the ring terminals. Otherwise, overheating may occur.

  • Before making the final DC connection or closing DC breaker/disconnector, be sure that the positive (+) must be connected to the positive (+) and the negative (-) connected to the negative (-)

  • Before connecting to the AC input power source, please install a separate AC breaker between the inverter and the AC input power source.

  • There are two power terminal blocks with “IN” (Input) and “OUT” (Output) markings. DO NOT mistakenly connect to the wrong connectors.

  • Never install the all-in-one solar charge inverter and lead-acid battery in the same confined space! Also do not install in a confined place where battery gas may collect.

  • Ensure that there is enough air flowing through the heat sink, and space of at least 200m to the left and right air outlets of the inverter shall be left to ensure natural convection heat dissipation.

  • This solar hybrid inverter does not support parallel operation, and does not support phase separation!


Previous: 
Next: 

Product Category

Support

Company

Contact Us

 fangjing@hinverter.com
  +86-133 0297 1039
 9/F, Jinyuanxing Hi-tech Industrial Park, No.6 Industrial Zone, Mashantou Community, Matian Street, Guangming District, Shenzhen, China
Copyright © 2022 Shenzhen Hinvert Electronics Co., Ltd. All Rights Reserved. Sitemap | Support By Leadong