- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
HMK PLUS
Hinvert
3500W
230 VAC
170-280 VAC (For Personal Computers) /90-280 VAC (For Home Appliances)
50 Hz/60 Hz (Auto sensing)
7000VA
10 ms (For Personal Computers) ; 20 ms (For Home Appliances)
single output
Pure sine wave
24 VDC
YES
4000W
120A
98%
1. This inverter combination machine of MPPT Solar Charge Controller and Pure Sine Wave Inverter, can take solar/Utility/generator to charge battery, Meantime change your DC/110Vac power to AC power which allow your home household appliances work. Can make your solar energy system less wire and control all the parameter in one machine.
2. Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
3. Two output modes: mains bypass and inverter output; uninterrupted power supply.
4. Available in 4 charging modes: Only Solar, Utility Priority, PV Priority, Utility & Solar hybrid charging.
5. Advanced MPPT technology with an efficiency of 98%.
6. Designed with a LCD screen.
7. Manual ON/OFF switch controlling AC output.
8. Power saving mode available to reduce empty load loss.
9. Intelligent variable speed fan to efficiently dissipate heat and extend system life.
10. Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
11. This solar inverter takes a 48V battery input to operate(can't work without battery, 48V battery is necessary）
| Model Name | HMK PLUS 3500 24 | |
| RATED POWER | 3500W | |
| INPUT | ||
| Voltage | 230 VAC | |
| Selectable Voltage Range | 170-280 VAC (For Personal Computers) | |
| 90-280 VAC (For Home Appliances) | ||
| Frequency Range | 50 Hz/60 Hz (Auto sensing) | |
| OUTPUT | ||
| AC Voltage Regulation (Batt. Mode) | 230VAC ± 5% | |
| Surge Power | 7000VA | |
| Efficiency (Peak) PV to INV. | 97% | |
| Efficiency (Peak) Battery to INV. | 94% | |
| Transfer Time | 10 ms (For Personal Computers) ; 20 ms (For Home Appliances) | |
| Output Port | Single output | |
| Waveform | Pure sine wave | |
| BATTERY & AC CHARGER | ||
| Battery Voltage | 24 VDC | |
| Floating Charge Voltage | 27 VDC | |
| Overcharge Protection | 33 VDC | |
| Maximum Charge Current | 100 A(From grid) | |
| SOC display | Shows battery State of charge in percentage and in voltage as well | |
| Sleeping Mode | YES | |
| Battery voltage low cut off selectable | 21V-24V | |
| Battery High voltage range selectable | 25V-30V | |
| Works without Battery | YES | |
| SOLAR CHARGER | ||
| Maximum PV Array Power | 4000W | |
| MPPT Range @ Operating Voltage | 100 ~ 430 VDC | |
| Maximum PV Array Open Circuit Voltage | 450 VDC | |
| Maximum Charging Current | 120A | |
| Maximum Efficiency | 98% | |
| PHYSICAL | ||
| Dimension, D x W x H (mm) | 100 x 310 x 380 | |
| Net Weight (kgs) | 8.7 | |
| Communication interface | RS485/ Wifi option(BMS Compatible with lithium battery using RS-485) | |
| LCD display | General small LCD | |
| OPERATING ENVIRONMENT | ||
| Humidity | 5% to 95% Relative Humidity(Non-condensing) | |
| Operating Temperature | 0°C - 55°C | |
| Storage Temperature | –15°C - 60°C | |
1. This inverter combination machine of MPPT Solar Charge Controller and Pure Sine Wave Inverter, can take solar/Utility/generator to charge battery, Meantime change your DC/110Vac power to AC power which allow your home household appliances work. Can make your solar energy system less wire and control all the parameter in one machine.
2. Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
3. Two output modes: mains bypass and inverter output; uninterrupted power supply.
4. Available in 4 charging modes: Only Solar, Utility Priority, PV Priority, Utility & Solar hybrid charging.
5. Advanced MPPT technology with an efficiency of 98%.
6. Designed with a LCD screen.
7. Manual ON/OFF switch controlling AC output.
8. Power saving mode available to reduce empty load loss.
9. Intelligent variable speed fan to efficiently dissipate heat and extend system life.
10. Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
11. This solar inverter takes a 48V battery input to operate(can't work without battery, 48V battery is necessary）
| Model Name | HMK PLUS 3500 24 | |
| RATED POWER | 3500W | |
| INPUT | ||
| Voltage | 230 VAC | |
| Selectable Voltage Range | 170-280 VAC (For Personal Computers) | |
| 90-280 VAC (For Home Appliances) | ||
| Frequency Range | 50 Hz/60 Hz (Auto sensing) | |
| OUTPUT | ||
| AC Voltage Regulation (Batt. Mode) | 230VAC ± 5% | |
| Surge Power | 7000VA | |
| Efficiency (Peak) PV to INV. | 97% | |
| Efficiency (Peak) Battery to INV. | 94% | |
| Transfer Time | 10 ms (For Personal Computers) ; 20 ms (For Home Appliances) | |
| Output Port | Single output | |
| Waveform | Pure sine wave | |
| BATTERY & AC CHARGER | ||
| Battery Voltage | 24 VDC | |
| Floating Charge Voltage | 27 VDC | |
| Overcharge Protection | 33 VDC | |
| Maximum Charge Current | 100 A(From grid) | |
| SOC display | Shows battery State of charge in percentage and in voltage as well | |
| Sleeping Mode | YES | |
| Battery voltage low cut off selectable | 21V-24V | |
| Battery High voltage range selectable | 25V-30V | |
| Works without Battery | YES | |
| SOLAR CHARGER | ||
| Maximum PV Array Power | 4000W | |
| MPPT Range @ Operating Voltage | 100 ~ 430 VDC | |
| Maximum PV Array Open Circuit Voltage | 450 VDC | |
| Maximum Charging Current | 120A | |
| Maximum Efficiency | 98% | |
| PHYSICAL | ||
| Dimension, D x W x H (mm) | 100 x 310 x 380 | |
| Net Weight (kgs) | 8.7 | |
| Communication interface | RS485/ Wifi option(BMS Compatible with lithium battery using RS-485) | |
| LCD display | General small LCD | |
| OPERATING ENVIRONMENT | ||
| Humidity | 5% to 95% Relative Humidity(Non-condensing) | |
| Operating Temperature | 0°C - 55°C | |
| Storage Temperature | –15°C - 60°C | |
